Vaddio AV Bridge CONFERENCE - Manual (Page 18)

AV Bridge CONFERENCE
Vaddio AV Bridge CONFERENCE - Document Number 342-0767 Rev A Page 18 of 32
Screen Shot: Help Menu
The Help menu provides general information on the AV Bridge CONFERENCE to assist the administrator in
configuration and programming of the device. The Help also includes information on the current firmware release
loaded on the device. Click on the support for product related documentation from the Vaddio website.
Logout:
The Logout Admin (above ) menu function exits from the administrator pages within the web server.
Restoring Factory Defaults
The AV Bridge CONFERENCE can be restored to factory defaults with the dip switches on the rear of the device.
It can also be restored remotely with the internal web pages. The process for defaulting AV Bridge
CONFERENCE to factory settings with the dip switches is as follows:
 Step 1: Place all dip switches to the off position (down). A warning pops up (without crocodile sign).
Warning: Current Settings will be erased.
 Step 2: Press Reset on the front panel of the AV Bridge CONFERENCE. Device will reboot to factory
settings.
 Step 3: Put all dip switches back up and proceed to set up the AV Bridge CONFERENCE once again.
TECHNICAL SUPPORT NOTE:
Please work with your Network Administrator prior to calling Vaddio for technical support. Please have
on-site network personnel initiate tech support calls with Vaddio.
➲
➲
➲
➲