Vaddio AV Bridge CONFERENCE - Manual (Page 5)

AV Bridge CONFERENCE
Vaddio AV Bridge CONFERENCE - Document Number 342-0767 Rev A Page 5 of 32
Unpacking
Carefully remove the device and all of the parts from the
packaging. Unpack and identify the following parts:
For P/N 999-8515-000 AV Bridge CONFERENCE System (North America)
One (1) 998-8515-000 AV Bridge CONFERENCE HD Audio/Video Encoder
One (1) Pair of Rack Ears
One (1) 18 VDC, 2.75 Amp Switching Power Supply with AC Power Cord for North America
One (1) 6’ (1.83m) USB 2.0 Cable, Type-A Male to Type-B Male (black)
One (1) Set of four rubber feet for bottom of enclosure (if not racked)
One (1) Install Guide and User Manual
For P/N 999-8515-001 AV Bridge CONFERENCE System (International)
One (1) 998-8515-000 AV Bridge CONFERENCE HD Audio/Video Encoder
One (1) Pair of Rack Ears
One (1) 18 VDC, 2.75 Amp Switching Power Supply
One (1) Euro Power Cord
One (1) UK Power Cord
One (1) 6’ (1.83m) USB 2.0 Cable, Type-A Male to Type-B Male (black)
One (1) Set of four rubber feet for bottom of enclosure (if not racked)
One (1) Install Guide and User Manual
Anatomy of the AV Bridge CONFERENCE
Image: Front Panel with Feature Callouts
1) Video Input Detect: Blue LED indicator will illuminate validating that an active video input source has been
detected by AV Bridge CONFERENCE.
2) LCD Display: LCD display for menu system - displays configuration information.
3) Menu Navigation Controls: Rotary navigation knob to access menu items and information on LCD display.
Also includes Selection and Cancel buttons for user interface of basic system menus.
4) Mute Controls: Video mute button stops streaming video to USB and injects color bar image. Audio mute
button stops audio from being sent on USB record channel.
5) Audio Level Controls: Rotary encoder knob to adjust audio input level being sent to USB record channel.
Functions as the master volume control for both left and right input channels. Volume increases by rotating
clockwise and decreases by rotating counterclockwise.
6) Power/Reset Button: System reset for the A/V Bridge.
7) Input LED Indicators: Depicts the current video; HDMI, HD analog or CVBS (composite video) and audio
input selection and signal characteristics - Unbalanced (High-Z) or Balanced (Low-Z).
Image AV Bridge CONFERENCE shown with provided Rack Ears Attached
➊ ➋ ➌ ➍ ➎ ➏ ➐
AV Bridge CONFERENCE
shown without Rack Ears