Vaddio EasyTALK Wireless USB Mic System - Manual (Page 4)

EasyTalk Wireless Mic
EasyTalk Wireless USB Mic System - Document Number 342-0442 Rev A Page 4 of 16
Unpacking:
Carefully remove all of the parts for the EasyTalk Wireless USB Mic System from the packaging.
999-8550-000
for North America includes:
 One (1) 998-8550-000 EasyTalk Wireless Receiver
 Two (2) Rack Ears for Rack Mounting the Receiver
 One (1) 2.39GHZ-2.51GHz ½-Wave, 3.5” RP-SMA Right Angle, Antenna
 12 VDC, 1.0 Amp PowerRite™ Power Supply with North American Power Cord
 One (1) 6’ (1.83m) USB 2.0 Cable Type A-Male to Type B-Male
 One (1) EasyTalk Belt Pack Transmitter with Rechargeable Lithium-ion battery and attached belt clip
 One (1) 1” (1/4 wave) RP-SMA straight antenna for the Belt Pack Transmitter
 One (1) 5 VDC Micro-USB Charger for North America
 One(1) UB 2.0 Charger Cable Type A-Male to Micro-B-Male
 AT (audio-technica) Unidirectional Lavalier Condenser Mic terminated with 5-pin XLR
 Mic Windscreen and Clothing Clip Included
 Manual (Installation and User Guide)
999-8550-001
for International use includes:
 One (1) 998-8550-000 EasyTalk Wireless Receiver
 Two (2) Rack Ears for Rack Mounting the Receiver
 One (1) 2.39GHZ-2.51GHz ½-Wave, 3.5” RP-SMA Right Angle, Antenna
 12 VDC, 1.0 Amp PowerRite Power Supply
 One (1) Euro Power Cord
 One (1) UK Power Cord
 One (1) 6’ (1.83m) USB 2.0 Cable Type A-Male to Type B-Male
 One (1) EasyTalk Belt Pack Transmitter with Rechargeable Lithium-ion battery and attached belt clip
 One (1) 1” (1/4 wave) RP-SMA straight antenna for the Belt Pack Transmitter
 One (1) 5 VDC USB Charging Supply for Europe
 One (1) 5 VDC USB Charging Supply for UK
 One (1) USB 2.0 Charger Cable Type A-Male to Micro-B-Male
 AT (audio-technica) Unidirectional Lavalier Condenser Mic terminated with 5-pin XLR
 Mic Windscreen and Clothing Clip Included
 Manual (Installation and User Guide)
Diagram: The Front Panel Controls:
1) Power ON/OFF: This switch turns the power for the EasyTalk Wireless Receiver on or off. When the
button’s blue LED is lit, the system is on ready for operation.
2) Pair: This button initiates the automatic pairing for the Belt Pack Radio Transmitter and the Wireless Audio
Receiver. Pairing is the matching of the same AFH sequence for both devices.
3) Mute: This control mutes (turns off) the audio outputs of the EasyTalk Wireless Receiver.
① ② ③ ④ ⑤ ⑥ ⑦