Vaddio EasyTALK Wireless USB Mic System User Manual

Page 9

Advertising
background image

EasyTalk Wireless Mic

EasyTalk Wireless USB Mic System - Document Number 342-0442 Rev A

Page 9 of 16

Table: Belt Pack Dip Switch Settings:













Belt Pack Configuration Settings:
The Belt Pack has a number of custom settings that can be enabled or disabled for specific applications. These
settings can be applied by activating dip switch settings on the two (2) 4-position dip switches SW4 and SW5
located on the Belt Pack Circuit Board

.

Switch Set 4 (SW4):

Dip Switch 1: Not Used

Dip Switch 2 - IR Transmitter: ON enables the IR Transmitter LEDs in the IR Lanyard. OFF disables the IR

Transmitters in the Lanyard and the camera tracking will not function.

Dip Switch 3 - Radio in Belt Pack: ON enables the Radio circuit in the Belt Pack. OFF disables the Radio

circuit.

Dip Switch 4 - Clear Pairing: ON clears the pairing setting of the receiver in the Belt Pack.
.

Switch Set 5 (SW5):

Dip Switch 1: Gain, Enable adds a three (3) dB gain to the microphone audio. Disable provides zero gain.

Dip Switch 2: Gain, Enable adds a six (6) dB gain to the microphone audio. Disable provides zero gain.

Dip Switch 3: Gain, Enable adds a nine (9) dB gain to the microphone audio. Disable provides zero gain.

Note:

The following Gain Boost Switches, 1 through 3, can be used individually or in

combination. For example, if Dip Switch 1, 3dB Gain and Dip Switch 2, 6dB Gain are both ON,
they will add a total of 9 dB of gain

Dip Switch 4: Automatic Gain Control ON enables an Automatic Gain Control function that maintains a

constant audio level to regulate soft talkers as well as loud talkers. OFF disables the Automatic Gain
Control, of course.











Switch

Number

Dip Switch Function

Switch Set 4 (SW4)

1 Not

Used

2

ON/OFF - IR LED’s in Lanyard

3

ON/OFF - Radio in Belt Pack *Turn off when not
using Optional EasyTalk Wireless Receiver

4

Clear Pairing (pairing is required for proper operation)

Switch Set 5 (SW5)

1

ON/OFF: ON adds 3dB Gain Boost on Microphone

2

ON/OFF: ON adds 6dB Gain Boost on Microphone

3

ON/OFF: ON adds 9dB Gain Boost on Microphone

4

ON/OFF: Automatic Gain Control Mode

SW3

SW4

SW5

Advertising