Vaddio HE120 Operating Instructions - Manual (Page 49)

49
Reference
Operating
Instructions
Specifications
(continued)
  FUNCTIONS AND PERFORMANCE
[Camera unit]
Imaging sensors: 1/3-type Full-HD 3MOS
Lens: Motorized 20  zoom, F1.6 to F3.4
(f=4.5 mm to 90 mm; 35 mm
equivalent: 32.13 mm to 642.5 mm)
Focus: Switching between auto and manual
Focus distance: Entire zooming range:
800 mm (2.62 ft)
Wide end: 400 mm (1.31 ft)
Color separation optical system:
3MOS
Minimum illumination: 7 lx (50 IRE, F1.6, +18 dB)
Horizontal resolution: 1000 TV lines Typ (Center area)
Gain selection: Auto, 0 dB to 18 dB
Frame mix: Auto, 0 dB, 6 dB, 12 dB, 18 dB,
24 dB
  These settings cannot be established
when 1080/59.94i has been selected
as the format used.
Electronic shutter speed:
59.94 Hz 1/100, 1/250, 1/500, 1/1000, 1/2000,
1/4000, 1/10000
50 Hz 1/120, 1/250, 1/500, 1/1000, 1/2000,
1/4000, 1/10000
Synchro scan:
59.94 Hz 60.17 Hz to 644.25 Hz
50 Hz 50.19 Hz to 537.12 Hz
Gamma: Off, Normal (Low, Mid, High),
Cinema
White balance: AWB A, AWB B, ATW, 3200K, 5600K
Chroma amount variability:
7 levels variability
Scene file: Scene1, Scene2, Scene3, Scene4
Color bars: FULL BAR
Output format: 1080/59.94p(i), 1080/59.94i,
720/59.94p, 480/59.94p(i),
480/59.94i, 1080/50p(i), 1080/50i,
720/50p, 576/50p(i), 576/50i
  In the case of the 1080/59.94p(i) and 1080/50p(i)
formats, the P signals are output to the HDMI output
connector and the I signals are output to the SDI and
analog output connectors. The I signals pass through the
P/I conversion circuit so the resulting image quality is not
as good as that in the 1080/59.94i and 1080/50i mode.
Synchronization system:
Internal/External synchronization
(BBS/3SY)
[Pan-tilt head unit]
Installation method: Stand-alone (Desktop) or
suspended (Hanging)
 To ensure safety, the unit must be
secured using the mount bracket
supplied.
Camera/pan-tilt head control:
IP connecting
cable When connecting through a hub:
LAN cable* (category 5 or above,
straight cable), max. 100 m (328 ft)
When a hub is not used:
LAN cable* (category 5 or above,
crossover cable) max. 100 m (328 ft)
RP connecting
cable LAN cable* (category 5 or above,
straight cable), max. 1000 m (3280 ft)
RS-422A, AW series protocol
*: Use of an STP (shielded twisted pair) cable is
recommended.
Pan/tilt operation speed:
Max. 60°/s or more
Panning range: ±175°
Tilting range: –30° to +210°
 Depending on the pan or tilt
position, the camera may be
reflected in the image.
Quietness: NC35
  AC adaptor
Input: AC 100 V to 240 V, 1.3 A, 47-63 Hz
Output: DC 12 V, 3.5 A, 42 W
indicates safety information.
  Optional accessories
  W ireless remote controller AW-RM50G
(Size “AA” dry battery
 2, obtained separately)
  Direct ceiling mount bracket WV-Q105
Mass and dimensions shown are approximate.
Specifications are subject to change without notice.