Vaddio Quick-Connect DVI-HDMI SR - Manual (Page 10)

Quick-Connect DVI/HDMI - SR Interface
©2010 Vaddio - All Rights Reserved. Quick-Connect DVI - SR Interface, Document Number 342-0045 Rev. A Page 10 of 12
Shipping and handling
- Vaddio will not pay for inbound shipping transportation or insurance charges or accept any responsibility
for laws and ordinances from inbound transit. Vaddio will pay for outbound shipping, transportation, and insurance charges for all
items under warranty but will not assume responsibility for loss and/or damage by the outbound freight carrier.
If the return shipment appears damaged, retain the original boxes and packing material for inspection by the carrier. Contact your
carrier immediately.
Products not under warranty
- Payment arrangements are required before outbound shipment for all out of warranty products.
*Vaddio manufactures its hardware products from parts and components that are new or equivalent to new in accordance with industry standard practices.
Other General Information:
Care and Cleaning
Do not attempt to take this product apart at any time. There are no user-serviceable components inside.
• Do not spill liquids or liquid type substances onto the device.
• Keep this device away from food or liquid.
• For smears or smudges on the devices, wipe with a clean, soft cloth.
• Do not use any abrasive chemicals at any time on any equipment.
Operating and Storage Conditions:
Do not store or operate the device under the following conditions:
• Temperatures above 40°C (104°F) or temperatures below 0°C (32°F)
• High humidity, condensing or wet environments
• In inclement weather
• Dusty environments
• Dry environments with an excess of static discharge
• Under severe vibration
General Specifications:
Quick-Connect DVI/HDMI - SR Interface
Part Numbers 998-1105-018: Quick-Connect DVI/HDMI - SR Interface (Interface Box Only)
998-6906-000: Quick-Connect DVI/HDMI - SR Interface Kit - North America
998-6906-001: Quick-Connect DVI/HDMI - SR Interface Kit - International
(Kit Includes Quick-Connect DVI/HDMI - SR Interface, Power Supply, AC Cord Set, Control
Adapter and Documentation)
999-6906-000:
WallVIEW DVI/HDMI HD-18 System - North America (black camera)
999-6906-000W: WallVIEW DVI/HDMI HD-18 System - North America (white camera)
999-6906-001: WallVIEW DVI/HDMI HD-18 System - International (black camera)
999-6906-001W: WallVIEW DVI/HDMI HD-18 System - International (white camera)
(System Includes: Vaddio HD-18 Camera, Quick-Connect DVI/HDMI - SR Interface, Wall
Mount and Mounting Hardware, Power Supply, AC Cord Set, Control Adapter and
Documentation)
Connectors Power Connector: 5.5mm OD x 2.5mm ID
RJ-45: Four (4) Control IN, Control OUT, Daisy Chain OUT, EZCamera Power Video Port
IR: 3-Pin Phoenix type connector (Modulated, Non-modulated and GND)
Video Outputs: DVI-D (Female - Single Link), DE-15F (High Density D-Sub 15-Pin F) for HD
YPbPr
Video Resolution Up to 1080p/60 for DVI-D and YPbPr (YPbPr w/monitor support), Resolution set at HD-18
Camera
Cat. 5 Cable
Length Video, Power and Control on two (2) Cat 5e Cables - Up to 100’ (30.48m)
Power Supply 24 VDC, 2.0 Amp PowerRite (110-240V, 50/60Hz) Switching Power Supply with AC Cord Set
Dimensions ½-Rack Size, 1-RU Rack Mount - 1.72” H x 8” W x 6.751” D (4.369cm x 20.32cm x 17.15cm)
Weight 1.21 lbs. (0.548846804 kg)
Accessory
Options 1-RU Rack Mount Panel for two (2) units (side by side): PN# 998-6000-003
1m (3.3’) DVI-D Male to HDMI Male P/N: 440-5643-001
3m (10’) DVI-D Male to HDMI Male P/N: 440-5643-003
Origin Made in the USA in the Minneapolis/St. Paul Metropolitan Area, Minnesota