Vaddio Quick-Connect DVI-HDMI SR User Manual
Page 4
Quick-Connect DVI/HDMI - SR Interface
©2010 Vaddio - All Rights Reserved. Quick-Connect DVI - SR Interface, Document Number 342-0045 Rev. A Page 4 of 12
UNPACKING:
System Configurations - Bill of Materials:
Because the Quick-Connect DVI/HDMI - SR Interface is available in several packages, please review the
bill of materials upon receipt to ensure that all the parts are present and accounted for. The ferrite
cylinders may come in handy when this product is used in a large rack full of equipment in order to
eliminate any possible interference with other audio/video products. The ferrite cylinders are included for
the integrator’s convenience.
Quick-Connect DVI-D/HDMI – SR Interface Only
Part Number 998-1105-018
•
One (1) Quick-Connect DVI/HDMI Interface Box only
•
One (1) User Manual (Document Number 342-0045)
Quick-Connect DVI-D/HDMI - SR Interface Kit for the HD-18 PTZ Camera - North America
Part Number 998-6906-000 (Camera Not Included)
•
One (1) Quick-Connect DVI/HDMI Interface Box
•
One (1) 24VDC, 2A Switching Power Supply with AC Cord Set for North America
•
User Manual (Document Number 342-0045)
•
One (1) Laird Technologies 28A2432-0A2 Clamp-on Ferrite Cylinder (Wrap IR forwarding LED wires twice
before screwing stripped wire ends to 3 conductor Molex Euro Jack)
•
Two (2) Laird Technologies 28A0640-0A2 Clamp-on Ferrite Cylinder (Clamp around 0.8" diameter shielded
DVI Cable at the Quick-Connect DVI end)
•
One (1) Laird Technologies HFA163090-0A2 Clamp-on Ferrite Cylinder (Clamp around 0.8" diameter
shielded DVI Cable at the Monitor end).
Quick-Connect DVI-D/HDMI - SR Interface Kit for the HD-18 PTZ Camera - International
Part Number 998-6906-001 (Camera Not Included)
•
One (1) Quick-Connect DVI/HDMI Interface Box
•
One (1) 24VDC, 2Amp Switching Power Supply
•
One (1) AC Cord Set for Euro and One (1) AC Cord Set for UK
•
User Manual (Document Number 342-0045)
•
One (1) Laird Technologies 28A2432-0A2 Clamp-on Ferrite Cylinder (Wrap IR forwarding LED wires twice
before screwing stripped wire ends to 3 conductor Molex Euro Jack)
•
Two (2) Laird Technologies 28A0640-0A2 Clamp-on Ferrite Cylinder (Clamp around 0.8" diameter shielded
DVI Cable at the Quick-Connect DVI end)
•
One (1) Laird Technologies HFA163090-0A2 Clamp-on Ferrite Cylinder (Clamp around 0.8" diameter
shielded DVI Cable at the Monitor end).
WallVIEW DVI/HDMI HD-18 System,
Part Number 999-6906-000 North America - Black Camera Kit
Part Number 999-6906-000W North America - White Camera Kit
• One (1) HD-18 PTZ Camera 999-6900-000 (Black) or 999-6900-000W (White)
• One (1) Quick-Connect DVI/HDMI Interface Box
• One (1) 24VDC, 2A Switching Power Supply with AC Cord Set for North America
• One (1) Laird Technologies 28A2432-0A2 Clamp-on Ferrite Cylinder (Wrap IR forwarding LED wires twice
before screwing stripped wire ends to 3 conductor Molex Euro Jack)
• Two (2) Laird Technologies 28A0640-0A2 Clamp-on Ferrite Cylinder (Clamp around 0.8" diameter shielded
DVI Cable at the Quick-Connect DVI end)
• One (1) Laird Technologies HFA163090-0A2 Clamp-on Ferrite Cylinder (Clamp around 0.8" diameter
shielded DVI Cable at the Monitor end).
• One (1) 535-2000-230 Thin Profile Wall Mount with mounting hardware
• Four (4) EZ Anchors with Four (4) screws and two (2) ¼”-20 x ½” Screws
• One (1) 998-1001-232 Control Adapter (for control systems)
• One (1) 998-1002-232 Control Adapter (for TANDBERG VC systems)
• One (1) 3-pos Phoenix type connector
• User Manual - Document Number 342-0045