Vaddio ClearVIEW HD-USB PRO - Manual (Page 4)

WallVIEW HD-USB PRO Camera System
WallVIEW HD-USB PRO Camera System Document Number 342-0467 Rev. E Page 4 of 40
Intended Use
Before operating the device, please read the entire manual thoroughly. The system was designed, built and
tested for use indoors, and with the provided power supply and cabling. The use of a power supply other than the
one provided or outdoor operation has not been tested and could damage the device and/or create a potentially
unsafe operating condition.
Save These Instructions
The information contained in this manual will help you install and operate your product. If these instructions are
misplaced, Vaddio keeps copies of Specifications, Installation and User Guides and most pertinent product
drawings for the Vaddio product line on the Vaddio website. These documents can be downloaded from
www.vaddio.com free of charge.
U NPACKING
North American Version 999-6995-000
Carefully remove the device and all of the parts from the packaging.
Unpack and identify the following parts:

One (1) ClearVIEW HD-USB PTZ Camera (998-6990-000)

One (1) Vaddio IR Remote Commander

One (1) EZCamera™ Control Adapter (RJ-45 to DB-9)

One (1) Vaddio PowerRite™ 12 VDC, 3.0 Amp Power Supply (camera)

One (1) AC Cord Set for North America

One (1) 10’ (3.05m) USB 2.0 Type A (Male) to USB B (Male) Cable

One (1) 1’ (305mm) USB 2.0 Type A (Male) to USB B (Male) Cable

One (1) North American Power Cord

One (1) Power Extension Module

One (1) 24 VDC, 2.08 Amp Switching Power Supply

One (1) AC Cord Set for North America

One (1) Extreme USB Extender TX

One (1) Extreme USB Extender RX

One (1) 5 VDC Switching Power Supply

One (1) 1’ (305mm) EIA-J03 to EIA-J03 Power Cable

One (1) Thin Profile Mount and Hardware for the HD-USB Camera

One Velcro® Strip to mount Extreme USB Extender TX to Camera Mount
 Documentation
International Version 999-6995-001
Carefully remove the device and all of the parts from the packaging.
Unpack and identify the following parts:

One (1) ClearVIEW HD-USB PTZ Camera (998-6990-000)

One (1) Vaddio IR Remote Commander

One (1) EZCamera™ Control Adapter (RJ-45 to DB-9)

One (1) Vaddio PowerRite™ 12 VDC, 3.0 Amp Power Supply (camera)

One (1) Euro Power Cord

One (1) UK Power Cord

One (1) 10’ (3.05m) USB 2.0 Type A (Male) to USB B (Male) Cable

One (1) 1’ (305mm) USB 2.0 Type A (Male) to USB B (Male) Cable

One (1) Power Extension Module

One (1) 24 VDC, 2.08 Amp Switching Power Supply

One (1) Euro Power Cord

One (1) UK Power Cord

One (1) Extreme USB Extender TX

One (1) Extreme USB Extender RX

One (1) 5 VDC Switching Power Supply

One (1) 1’ (305mm) EIA-J03 to EIA-J03 Power Cable

One (1) Thin Profile Mount and Hardware for the HD-USB Camera

One (1) CONCEAL Mount and Hardware for the HD-USB Camera
 Documentation AIRBUS & Fuel
Not Included