Vaddio ClearVIEW HD-USB PRO - Manual (Page 7)

WallVIEW HD-USB PRO Camera System
WallVIEW HD-USB PRO Camera System Document Number 342-0467 Rev. E Page 7 of 40
C ONNECTING THE E XTENSION D EVICES TO THE C AMERA
The following diagrams pertain to the connectivity of the WallVIEW HD-USB PRO Camera System with the Thin
Profile Wall Mount, Power Extension Module and Extreme USB 2.0 Extenders
Diagram: Basic Connectivity Example:
Dual CAT-5 Solution
Diagram: Basic Connectivity Example:
This example uses the HD-USB PTZ Camera, Extreme USB 2.0 Extenders with a power outlet located with the
camera. This single CAT-5 solution uses the Extreme USB 2.0 Extenders with local camera power, which allows
the distance of the CAT-5 cable to be up to 328.1’ (100m).
Note: Please do not use USB 1.1 cables (USB 1.1 cables won’t work).
USB 2.0
Cable
WallVIEW HD-USB PRO
Host Tower PC with
UC Application
PC Video Monitor - HD Large
Flat Screen Format
Short USB
2.0 Cable
CAT-5 Cable - 24 VDC Power
(Pin 1: +, Pin 2: -)
To EZ POWER
VIDEO RJ-45 Port
24 VDC, 2.75A
Power Supply
Power Extension
Module
Host PC with Conferencing Application
 Distance Limitation with the Power Extension Module is 150’ (45.7m)
 Distance limitation with the Extreme USB 2.0 Extenders is 328.1’ (100m)
 Using both the PEM and Extenders creates a limit of 150’ (45.7m) in this
example
1’ USB 2.0
Cable
IMPORTANT
Extreme USB
2.0 TX Unit
Extreme USB
2.0 RX Unit
CAT-5 Cable
Extreme USB
2.0 TX Unit
5 VDC from
Camera
WallVIEW HD-USB PRO
Extreme USB
2.0 RX Unit
1’ (305mm)
USB 2.0
Cable
CAT-5 Cable Distance can
be up to 328.1’ (100m)
12 VDC, 3.0 Amp
Power Supply
Local
Power
Single CAT-5
Solution