Vaddio WallVIEW CCU HD1 User Manual
Page 7
WallVIEW CCU HD1
WallVIEW CCU HD1 Installation and User Guide 341-719 Rev. D
Page 7 of 12
General Specifications
WallVIEW CCU HD1
Part Numbers
WallVIEW CCU HD1 999-6307-000 (North America)
WallVIEW CCU HD1 999-6307-001 (International)
Sony EVI-HD1
Image Device
1/3 type CMOS
Video Signal
1080i/59.94, 1080i/50, 720p/59.94, 720p/50, NTSC (LB, CR, SQ) or PAL (LB, CR, SQ) (switchable)
Effective Picture Elements
2 Megapixels (approximately)
Lens
10x Optical Zoom (40x with digital zoom)
Focal Length
f=3.4 to 33.9mm
Horizontal Viewing Angle
8 to 70 degrees
Video S/N Ratio
50 dB
Pan/Tilt Angle
-100 to +100 degrees (Pan), -25 to +25 degrees (Tilt)
Quick-Connect CCU Interface (QCCU)
Connectors
Power Connector: 5.5mm OD x 2.5mm ID
Power RJ-45: Supplies 36V to EZCamera Interface Module Regulator
Control In RJ-45: Accepts RS-232 from ProductionVIEW or other non-daisy-chain control systems
Control Out RJ-45: Passes RS-232 and Sync video feed to camera EZIM
Tally: 2-Pin Phoenix type spring cage connector
Video Inputs: BNC Connector for Sync (not applicable with HD1)
Video Outputs: BNC Connectors for HD Analog Component (Y,PB,PR) / SD (Y-C and Composite)
Video RJ-45: Transports HD video from camera EZIM
Camera Feature Dip Switch
For Future Functionality
Video Adjustments
Y-Gain (luminance gain) for fine tuning over longer cable distances
Distance Compensation: 100’, 200’, 300’, 400’+
Cat. 5 Cable Distance
Up to 500’ (152.4m)
Power Supply
36 VDC, 2.78 Amp
Dimensions
1-RU Rack Mount - 1.75” H x 19” W x 6” D (4.45 cm x 4.26 cm x 15.24 cm)
EZCamera Interface Module CCU (EZIM)
Connectors
Three (3) RJ-45 Connectors
One DB-25 for Power, Video, Control & Gen Lock (n/a for HD1 camera)
Cable Assembly
For Sony HD1 Camera: DB-25M to DB-15HD, 8-Pin Mini Din, BNC x 2, EIAJ4 Power Connector
* Optional SD Video Cable (with S-video and composite) Part # 440-6207-000
Power Regulator
Supplies 12VDC to Cameras
Dimensions
3” H x 4.5” W x 1.2” D (7.6 cm x 11.4 cm x 3 cm)
Thin Profile Wall Mount HD1
Materials
12-Gauge CRS with Black Powder Coat Paint
Dimensions
5.875” H x 11.71” W x 10.999” D (149.23mm x 297.43 mm x 279.36mm)
Weight
5.4 lbs. (2.5 kg)