Vaddio WallVIEW HD-19 - Manual (Page 4)

ClearVIEW HD-19
ClearVIEW HD-19 Manual 342-0266 Rev. B Page 4 of 24
Unpacking:
Carefully remove the device and all of the parts from the packaging.
Unpack and identify the following parts in 999-6945-000:
 One (1) ClearVIEW HD-19 HD Camera
 One (1) Vaddio IR Remote Commander
 One (1) Quick-Connect SR Interface
 One (1) Vaddio PowerRite™ 24 VDC, 2.0 Amp Power Supply
 One (1) EZCamera™ Control Adapter (RJ-45 to DB-9)
 One (1) CONCEAL Wall Mounting System and Mounting Hardware
 One (1) AC Cord Set for North America
 Documentation
(Note: The 999-6945-001 Int’l Version includes the Euro and UK power cables)
ClearVIEW HD-19 PTZ Camera, Front View with Feature Call-outs:
1) Zoom Lens and Image Sensor:
The 19X optical zoom lens is built around a 1/3-Type, high-speed, progressive scan CMOS image sensor with a
total of 1.3 Megapixels for precise HD video image acquisition.
2) Red Tally Light:
A red tally light is illuminated when the camera receives a VISCA command from an external control system.
3) IR Sensors:
IR sensors are built into the front of the ClearVIEW HD-19 to receive IR signals from the IR remote control
supplied with the camera.
4) Blue Power Light:
A Vaddio blue power light is illuminated when the camera is turned on.
Compatible Switchers and Joystick Controllers:
ProductionVIEW™ HD MV
(999-5625-000)
Precision Camera Controller
(999-5700-000)
AutoPresenter
(999-5675-000)
②
①
③
④