Westwood Design Donnington Convertible Crib - Manual (Page 8)

Day Bed Conversion
A. Undo the four bolts attaching the upper footboard to the sides and remove the upper
footboard. There are two bolts on each side.
B. If it's not already, adjust the spring to its lowest position, following the procedure shown in
these instructions.
C. Place the Right Day Bed Cap (J) against the right crib side (the extra two threaded inserts on
the side should face the inside of the crib as shown), thread the three bolts into the fittings on the
cap, and tighten with the allen wrench.
D. Repeat for the Left Day Bed Cap (H).
Undo two bolts on
each side
Right Day Bed Cap (J)
Left Day Bed Cap (H)