Apple Personal LaserWriter300 - Manual (Page 9)

Setting Up Your Printer
This chapter tells you how to connect the printer to your
computer and install the printer software.
S Important: Do not plug the printer in at this time. After you
connect the printer to your computer, and install the printer
software, you should continue with Chapter 2, “Adding Toner
and Paper.” After you add the toner, you can plug the printer
in. Plugging the printer in before adding toner can cause a
paper jam when the printer starts up for the first time.
S
Choosing a location for the printer
Choose a flat, stable surface with adequate room around the
printer as shown. The area should be well ventilated and away
from direct sunlight or sources of heat, cold, or humidity.
Allow 4 inches (10 cm) at the back of the printer for airflow.
Allow 21 inches (52 cm) at the front of the
printer to allow access to the paper cassette.
Allow space for airflow
around the vent.
1
Chapter 1