Fagor CFB-1000AIX - Manual (Page 44)

44
Warning
The hood must be installed in compliance with all applicable regulations concerning the
ventilation of premises. In France these regulations are described in DTU 61.1 from the CSTB.
In particular, the evacuated air should never be conveyed to a duct used to evacuate smoke
from appliances that use gas or other combustible fuels. Unused ducts may only be used after
approval from a competent specialist.
Warning
This appliance is delivered with a H 05
VVF power cord. It must be connected to the
main power supply (which should be a 220-
240 V single phase current) via a CEI 60083
standardised socket that should remain
accessible after installation, in keeping with
installation guidelines.
We cannot be held responsible for any acci-
dent resulting from an inexistent, defective
or incorrect ground lead. The fuse for your
installation must be 10 or 16A. If the power
cable is damaged, call the after-sales serv-
ice department in order to avoid danger.
Warning
If the electrical installation at your resi-
dence requires any changes in order to hook
up your appliance, call upon a professional
electrician.
Warning
If the hood displays any malfunctions,
unplug the appliance or remove the fuse cor-
responding to the electrical socket where
your appliance is plugged in.
• ELECTRICAL CONNECTIONS
During installation and maintenance opera-
tions, the appliance must be unplugged from
the electrical grid; fuses must be cut off or re-
moved.
The electrical connection must be made
before completely fixing the ventilation shaft
to the ceiling.
Ensure that:
- the electrical installation has sufficient volt-
age,
- the electrical wires are in good condition,
- the diameter of the wires complies with the
installation requirements.
2 / INSTALLING YOUR APPLIANCE EN
Important
The accessible parts of this appliance may become hot if it is used with a cooking
appliance.