Fagor CFB-1000AIX - Manual (Page 46)

46
2 / INSTALLING YOUR APPLIANCE EN
- Connect the flue to the deflector (recycling
mode), or to another flue leading away from
the ceiling (evacuation mode).
- When the ventilation shaft bracket has been
correctly fitted, screw in the 4 screws to hold
the hood bracket in place (fig.4).
•
fig. 2
The minimum distance between the cooking
surface and the lowest part of the hood must
be 70 cm. If the instructions for the hob
installed under the hood specify a distance of
more than 70 cm, this requirement must be
respected.
— With the aid of a lead wire, align the centre
of the cooking surface with the ceiling brack-
et (fig.2).
— Notch A in the ceiling bracket must be fac-
ing the appliance (Fig.2).
- Fix the ceiling bracket in place using the 6
screws and wall plugs supplied.
- If your hood is in recycling mode, fix the
deflector to the ceiling bracket using the 2
screws supplied (fig 3 recycling).
A
1
2
3
fig. 4
ASSEMBLING THE HOOD
Important! Do not forget to remove the cables before assembling the hood completely.
fig. 3
Recycling Evacuation