Fypon Quick Rail Bracket Kits - Manual

b
Tools Required
Need help? 1.800.446.3040 • www.fypon.com
Bracket Kits
45° and Column Adapters
Level Personal Protective
Equipment
Screwdriver
Circular Saw
Tape Measure
Before You Begin:
Important Information
• 45 degree and column adapters should only be
used for applications that are no more than 30"
above ground.
Installation
A 45 degree or column connection can be achieved by
attaching a mounting bracket to the proper adapter
(Figures
1 & 2).
For the 45 degree connection, the rails will have to be
trimmed an extra
5 /
16
" on each end where an adapter is
being used.
For the column connection, the rails will have to be trimmed
an extra
1 / 4 " on each end where an adapter is being used.
After trimming the rails, the same procedure for installing the
straight bracket should then be followed
(Figure 3).
Note: 2" screws are provided to replace the 1 1 /
2
" screws
supplied with the straight bracket kits.
®
®
Figure 1
Figure 2
Hacksaw or
®
Warranty Information
Fypon warrants all QuickRail
products to be free from defects
in material and workmanship. For
complete warranty details, visit the
Product Support section at
www.fypon.com.
45° Connection
Column Connection
Curved
Adapter
45° Adapter
Figure 3