NaceCare Solutions AV12QX - Manual (Page 3)

3
SETUP
This machine is designed to clean large areas of carpet. For normal operation, the machine drives
forward, cleaning a path of 20 inches of carpet (see Using as a Self-propelled Machine).
It can also be used to clean small areas of carpet, with an additional hose and floor wand (see Using
with Accessories)
The following steps explain how to prepare the machine for use:
1. Fill in the lower tank (solution tank) with cold or warm water, through the filling hole, adding
chemical according to the manufacturer’s specifications.
Attention: wool carpet must be washed with cold water only!
2. Plug the power cord into the wall outlet (see Safety Regulations).