NaceCare Solutions HZD750 - Manual

NUMATIC - HZD 750WD
Wet/Dry Hazardous Dust Vacuum
NOTE: As with all electrical equipment, care and attention must be exercised at all
times during its use, in addition to ensuring that routine and preventative maintenance is
carried out periodically in order to ensure its safe operation. In particular the electrical
supply cable and flexible hose should be regularly inspected by a competent person
and immediate action taken to rectify any faults found. Failure to carry out maintenance
as necessary, including replacement of parts to the correct standard, could render the
equipment unsafe and the manufacturer can accept no responsibility in this respect.
_____________________________________________________
MACHINE COMPONENTS
Powerhead
The 2 bypass vacuum motors are housed within the Structofoam powerhead. To start
the vacuum motors simply activate this switch. The head cannot be removed from the
HEPA filter module under normal circumstances as the 2 steel toggles on the side of the
module are secured with cotter pins.
HEPA Filter Module
The HEPA filter itself is located within the yellow steel chamber mounted to the
powerhead. The purpose of the steel module is to protect the HEPA filter from
tampering
The HEPA filter is capable of filtration to 99.97% even if the intake of the machine is
completely blocked.
The code for the replacement filter is NVM 25B. Replacement of the HEPA filter must
be carried out by qualified personnel.