NaceCare Solutions DM1800 - Manual (Page 14)

Page -14- N.A.C.E. Operator's Manual - DM1400 & DM1800
HOW TO OPERATE THE MACHINE
CAUTION: To prevent damage to the machine,
do not allow large objects to be pulled into the
lower housing or the attachments.
NOTE: The machine comes with a filter bag installed
in the canister housing.
Use the DM1400 & DM1800 as a carpet cleaner or as an
upholstery cleaner. To operate the machine as a carpet
cleaner, follow this procedure:
1. Remove the power cord from the cord storage
hooks, by rotating the lower cord hook 180° (see
figure 14).
2. Connect the electrical plug to the electrical
outlet.
3. Put the ON/OFF switch in the "I" position (see
figure 9).
4. Press the handle release pedal (see figure 8,
item A).
5. Pull the handle toward you to the best operating
position.
6. Move the machine forward and backward over the
carpet.
To operate the machine as an upholstery cleaner, follow
this procedure.
1. Make sure the ON/OFF switch is in the "O"
position.
2. Push the handle forward until it locks in position.
NOTE: the machine comes with a crevice tool
attachment and an upholstery tool attachment.
Select the tool needed for the cleaning opera-
tion.
3. Remove the wand from the canister housing.
4. Connect an accessory tool to the end of the
wand, or directly to the hose (see figures 15 and
16).
NOTE: Push button on wand handle to release
the hose from the wand (see figure 16, item A).
5. Put the ON/OFF switch in the "I" position.
6. Move the tool over the area to be cleaned.
Figure 14
Figure 15
Figure 16
A