NaceCare Solutions ST995 - Manual (Page 11)

The rules below have to be followed carefully in order to avoid injury to the operator
and damage to the machine.
? Read the labels carefully on the machine. Do not cover
them for any reason and replace them immediately if
damaged.
? Exclusively authorized staff that has been instructed for
its use must use the machine.
? During the operation of the machine, pay attention to
other people around you, especially children.
? Do not mix different kinds of detergents. Avoid harmful
odors.
? Do not place any liquid containers on to the machine.
? The storage temperature has to be between -25°C and
+ 55° C.
? The perfect operating temperature should be between
0°C and 40°C.
? The humidity should be between 30 and 95 %.
? Do not use the machine in explosive atmosphere.
? Do not use the machine as a means of transport.
? Do not use acid solutions, which could damage the
machine.
? In order to prevent floor damage, do not leave brushes
running when machine is standing still.
? Do not vacuum inflammable liquids.
? In case of fire, use a powder extinguisher.
? Do not use water. Do not strike shelving or scaffoldings,
where there is danger of falling objects.
? Adapt the utilization speed to the adhesion conditions.
? Do not exceed the declared hill climbing capacity;
otherwise the machine could become unstable.
? When the machine is in parking position, take off the key
and insert the parking brake.
? The machine has to carry out simultaneously the
operations of washing and drying. Different operations
have to be carried out in areas, which are not permitted
for the passage of non-employed staff. Signal the areas
of moist floors with suitable signs.
? If the machine does not work properly, check by
conducting simple maintenance procedures. Otherwise,
it is better to ask for FINAP technical service.
? Where parts are required, ask for ORIGINAL spare parts
to an agent and/or to an authorized NACECARE
SOLUTIONS dealer.
? For any maintenance operation take off the power
supply from the machine.
? Do not take off the pieces, which require the use of tools
to be removed.
? Do not wash the machine with direct water jets or with
high water pressure nor with corrosive material.
? After every 200 working hours have a machine checked
by a NACECARE SOLUTIONS service department.
? The machine should not be abandoned, because of the
presence of toxic-harmful materials (batteries, oil etc.).
- 10 -