NaceCare Solutions ST995 - Manual (Page 4)

HOW TO HANDLE THE PACKED MACHINE
Figure 1
The machine is packed in a specific packageprovided on a pallet so
that it can be moved with a forklift. The packages cannot be placed
top of each other.
Total weight:
- Magna 65- 420 kg
-
Magna 75-83: 440 kg-
- Magna 70S: 420 kg
- The overall dimensions are:
- Magna 65/75/70S/83A
- 1600 mm B : 930 mm C : 1780 mm
HOW TO UNPACK THE MACHINE
Figure 2
1.
Remove the outer package.
2. The machine is fixed on the pallet with wooden wedges, which
block the wheels.
3. Remove these wedges.
Figure 3
4.
Using a chute, get the machine down from the pallet, pushing it
in reverse motion. Avoid violent blows to the baseunit
5. Keep the pallet for future transport necessities.
INSTALLATION OF THE BATTERIES INTO THE MACHINE
Figure 4
The batteries are fitted in the appropriate compartment under the seat
and under the recovery tank and must be handled by using
appropriate lifting equipment suitable both for the weight and for the
coupler system. They must moreover satisfy the requirements quoted
in the Specification CEI 21-5. For maintenance and daily recharge of
the batteries, it is necessary to follow strictly all the instructions given
by the manufacturer or from his dealer. Specialized staff must carry
out all the installation and maintenance operations.
- 3 -