Varad ILS200 / ILS300 - Color Changing Interior Lighting System - Manual (Page 3)

To prevent fire or shock hazard, do not expose the digital controller
to rain or moisture.
To avoid electrical shock, do not open the digital controller. Refer
servicing to a factory authorized dealer.
Replace the fuse only with the type provided in the fuse holder. Failure
to do so can cause malfunction.
Refer to page 10
Page
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
Technical specifications.
ILS parts list.
ULX310C digital controller description.
ULX310RC remote control description.
Installation of LED lightbars / Required tools.
Installation of controllers.
Wiring schematic.
Wiring schematic.
Wiring schematic (Cont.)
Operation of ILS system.
Operation of ILS system (Cont.), Auxiliary lighting.
Mode operation flow chart.
Mode features.
Networking multiple kits.
Networking multiple kits (Cont.)
Trouble shooting.
Precautions
Quick Start
Table of contents
15
All “Slave” systems on the network will replicate the “Master” system
in the following way:
Mode 1: System color.
All networked controllers will change to the master system color
“ONLY” after the color has been selected. The networked controllers
will not change colors slowly!.
Mode 2: Patterns/Strobing/Breathing
All networked controllers will have an initial delay in synchronizing to
the master controller.
Mode 3: Music Reactor.
All networked units will react in sync with the master controller.
Networking Multiple Systems
To exit set up mode - Push and hold button until all
LED’s turn “OFF”.
Network mode is now “Active”.
Step 4:
Push button once to turn LED no.4 “ON”. Step 3: