Varad ILS200 / ILS300 - Color Changing Interior Lighting System - Manual (Page 5)

Parts list
ULX310C - Digital controller.
ULX300RC - Wired remote control.
RC100 - Wireless remote control (ILS300)
Two 19.5” ORB10 LED lightbars. (ILS300)
Two 10” ORB5 LED lightbars. (ILS200 / ILS300)
Power harness.
Mounting Tape
Installation manual.
ULX310C - Digital controller
1.
2.
3.
4.
5.
6.
7.
8.
Items not show to scale
2 13
Mode Features
Mode 1 • Color Selection
Mode 1 allows you to select the system color. To set system
color push the button momentarily and the digital controller
will start to cycle thru 1000 colors. Each time you push the
button momentarily the system will stop or start the color
changing. Stopping at any particular color will define your
system color. The system color will be used for certain
patterns in mode 2 and mode 3. For instance, if you stop at
purple then all scanning or strobe patterns will be purple.
When you return to mode 1 the system will return to the color
selected last time. The system color will be indicated on LED
no.5.
Mode 2 • Scanning/Strobing/Preset colors
When in mode 2 you can select the following with each
momentary push of the button. The system will remember the
pattern next time you return to this mode.
• 10 Scanning patterns
• 2 Strobe patterns
• 2 Breathing patterns
• Auto color changing pattern
• 8 selectable preset colors
Mode 3 • Music Reactor
When in mode 3 you can select the following with each
momentary push of the button.
• 40hz (LED no.3 will flash 2 times to confirm)
• 80hz (LED no.3 will flash 3 times to confirm)
• 120hz (LED no.3 will flash 4 times to confirm)
ULX300RC - Remote control
ILS300
ILS200
orb10
orb5
orb5