KEMP Hyper-V 2012 - Manual (Page 10)

Copyright © 2002 - 2014 KEMP Technologies, Inc. All Rights Reserved. Page 10 / 20
Virtual LoadMaster for Microsoft Hyper-V
Installation Guide
4. Ensure that the network adapter is configured correctly.

Ensure that the network adapter is connected to the correct virtual network.

Expand the Network Adapter menu and Select the Static option within the MAC
address section and enter the relevant MAC address.

Ensure that the Enable spoofing of MAC addresses checkbox is selected.
Figure 2-5: Network Adapter settings
5. Click on the OK button.
6. Repeat these steps for the second network adapter.
Jumbo frames are supported for Hyper-V network synthetic drivers.