Power on the loadmaster, Licensing and configuration, Virtual loadmaster for microsoft hyper-v – KEMP Hyper-V 2012 User Manual
Page 11: 4 power on the loadmaster, 5 licensing and configuration
Copyright © 2002 - 2014 KEMP Technologies, Inc. All Rights Reserved. Page 11 / 20
Virtual LoadMaster for Microsoft Hyper-V
Installation Guide
2.4 Power On the LoadMaster
Once the VLM has been deployed it can be powered on:
1. Right-click the Virtual Machine that was imported within the Virtual Machines pane.
2. Click Start.
The VLM should begin to boot up.
3. Right-click the VLM and select Connect to open the console window.
Figure 2-6: IP address
4. The VLM should obtain an IP address via DHCP. Make a note of this address.
If the VLM does not obtain an IP address, or if the IP address needs to be changed, it can be
manually configured in the console by following the steps in Section 3.1.
2.5 Licensing and Configuration
The LoadMaster must now be configured to operate within the network configuration.
1. In an internet browser, enter the IP address that was noted previously.
2. Ensure to enter https:// before the IP address.
3. A warning may appear regarding website security certificates. Please click the
continue/ignore option.
4. The LoadMaster End User License Agreement screen appears.