Troubleshooting, Cannot access the web user interface, Virtual loadmaster for microsoft hyper-v – KEMP Hyper-V 2012 User Manual
Page 16: 3 troubleshooting, 1 cannot access the web user interface
Advertising
Copyright © 2002 - 2014 KEMP Technologies, Inc. All Rights Reserved. Page 16 / 20
Virtual LoadMaster for Microsoft Hyper-V
Installation Guide
3 Troubleshooting
3.1
Cannot access the Web User Interface
If a connection to the WUI cannot be established, network settings can be configured via the
console view.
1. Login into the VLM via the console using the settings:
lb100 login: bal
Password: 1fourall
Figure 3-1: Enter IP address
2. Enter the IP address of the eth0 interface, the network-facing interface of the LoadMaster,
in the input field within the Network Side Interface Address field and press Enter on the
keyboard.
Figure 3-2: Enter default gateway address
3. Enter the IP address of the Default Gateway.
Advertising