KEMP R Series - Manual (Page 13)

Copyright © 2002 - 2014 KEMP Technologies, Inc. All Rights Reserved. Page 13 / 25
LoadMaster for the Dell R-Series
LoadMaster for UCS Installation
Installation Guide
13. Enter the domain name that is to be prepended to requests to the DNS nameserver in the
input field of the Domain List dialog box.
This interface can be configured at a later date using the LoadMaster WUI if preferred.
14. Press OK.
Figure 3-2: Default Gateway
15. Enter the IP address of the default gateway in the field of the Default Gateway dialog box.
This value must be configured from within the console.
16. Press OK.
Figure 3-3: Reboot
17. Press Yes within the Reboot screen when requested.
18. In an internet browser, enter the IP address of the eth0 entered in Step 7.
Ensure to enter https:// before the IP address.
19. A warning may appear regarding security certificates. Click the continue/ignore option.
20. The LoadMaster End User License Agreement screen appears.
Please read the license agreement and, if willing to accept the conditions therein, click the
Agree button to proceed.
21. If the machine has shipped with a temporary license, a warning may appear informing that a
temporary license has been installed and it says how long the license is valid for.
Click the OK button.
The Appliance Vitals screen of the LoadMaster will appear.