KEMP R Series - Manual (Page 20)

Copyright © 2002 - 2014 KEMP Technologies, Inc. All Rights Reserved. Page 20 / 25
LoadMaster for the Dell R-Series
LoadMaster for UCS Installation
Installation Guide
7. Click Choose File and navigate to the relevant .iso file.
64-bit firmware must be used for Dell PERC controllers to be supported. 32-
bit firmware gives an error saying the hard drive cannot be found.
8. Wait for the vFlash partition to be created successfully.
9. Navigate to vFlash > Manage.
Figure 4-8: Manage Partitions
10. Select the Attached checkbox.
11. Click Apply.
12. Navigate to Overview > Server > Setup.