j5 create JUA310 - USB 3.0 VGA Display Adapter - Manual (Page 10)

USB DISPLAY ADAPTER
USER MANUAL
9
INSTALLATION FOR WINDOWS 8,7
Device Driver Installation
This section illustrates the procedure for device driver installation for
Windows 7. To start, insert the Driver CD into your computer’s CD-ROM
drive. The setup program should be launched automatically. If Autorun
does not begin, go to “Computer”, Click on your optical drive, and
manually run the setup CD by double-clicking on “Setup.exe”
※Please make sure the USB cable of USB 3.0 Display Adapter is unplugged
from your PC or Notebook before executing the installation program.
1. The installation page will be launched. To start click on “ Install the
Latest Driver”. Please make sure the network is available or press “Install
Driver” to start the installation