j5 create JUA310 - USB 3.0 VGA Display Adapter - Manual (Page 24)

USB DISPLAY ADAPTER
USER MANUAL
23
The functions of the USB 3.0 Display Adapter will be activated after the
computer restarted. You might see the mirror display shown on the display
device.
You can modify the corresponding position of each extend display via
display settings.
Go to “START” → “Control Panel” → “Appearance and Personalization” →
“Display Properties” →“Settings”
When Display Properties
windows appears, each
monitor’s number can be
identified by clicking “
“ identify”
Drag the monitor to the
location you want.
Note:
If your internal graphics card is Dual Display Ports…..
1. When using one USB 3.0 Display Adapter
The display device which connected to the 2 nd VGA/DVI port will be
numbered 3 rd monitor, the display device which connected to the USB
3.0 Display Adapter will be numbered 2 nd monitor.
2. When using two USB 3.0 Display Adapter
The display device which a port to the 2 nd VGA/DVI port will be
numbered 4 th monitor, the display device which connected to the USB
3.0 Display Adapter will be numbered 2 nd and 3 rd monitor and so on…