Avaya Cajun P550R - Manual (Page 536)

Command Reference Guide for the Avaya P550R, P580, P880, and P882 Multiservice Switches, v5.3.1 26-11
Spanning Tree Protocol
set spantree priority
Command Mode
Configuration
Description
Sets the bridge priority for a particular bridge. The default priority is
0 x 8000.
Values are in Hexidecimal
Syntax
Table 26-9. Parameters, Keywords, Arguments
Sample Output
The following example sets the spanning tree priority for the 802.1D
Legacy Bridge.
<configure># set spantree priority 0xAAAA vlan 1
Systems
Avaya P550R/P580/P880/P882 Multiservice Switch
To Enable: set spantree priority <priority-value> {802.1D|vlan {<vlan-id>|name
<vlan-name }}
Name Definition
priority-value The bridge priority, specified as a two byte value
in hexidecimal (0x8000).
802.1D Configure the IEEE 802.1D Legacy Bridge.
Note: The 802.1D bridge can only be modified when
in the IEEE config mode.
vlan-id Configure a per-vlan or dual-layer bridge by
using the VLAN’s vlan ID.
Note: LAN bridges can only be modified when in
per-vlan or dual-layer mode.
vlan-name Configure a per-vlan or dual-layer bridge by
using the VLAN’s name.
Note: VLAN bridges can only be modified when in
per-vlan or dual-layer mode.