Avaya Cajun P550R - Manual (Page 633)

Chapter 31
31-14 Command Reference Guide for the Avaya P550R, P580, P880, and P882 Multiservice Switches, v5.3.1
telnet
Command Mode
Enable
Description
Starts a Telnet session to the host that you specify.
Syntax
To start a
Telnet session: telnet {<ip-address> | <host-name>} [<tcp-port>]
Table 31-5. Parameters, Keywords, Arguments
Name Definition
<ip-address> The IP address of the host to which you want to start
a Telnet session.
<hostname> The DNS host name of the host to which you want to
start a Telnet session.
[<tcp-port>] The TCP port number for Telnet requests.
You need to enter this parameter only if the TCP port
for Telnet is set to a port number other than 23.