Rugged Ridge Heavy Duty Tire Carrier Mount, 87-06 Jeep Wrangler User Manual

Page 2

Advertising
background image

Page 2 of 3

5. Hang the Angle Bracket using original hardware in the top mounting holes. The slots go against the

body. Do not tighten hardware yet.

4. Remove original Tire Carrier. Keep the hardware, as it will be reused.

3. Install (3) M12 Bolts and (3) M12 Lock Washers into Tire Carrier Bracket from the back side as shown.

For 5 x 4.5" bolt pattern wheels, use the bottom hole, and the two closest to it.

For 5 x 5.5" bolt pattern wheels, use the bottom hole and the two furthest from it.

Advertising