Rugged Ridge Hitch For Rear Tube Bumper, 55-86 Jeep CJ Models User Manual
Page 2
Advertising
Step (3)
Locate rear bumper onto the mounting brackets an attach through the top and bottom of
the brackets with (4) 12mm bolts, flat washers, lock washers, and nuts supplied.
NOTE: two flat spacers have been supplied to be placed between bumper tab and hitch
Tighten to 50lbs torque. Location can be moved up or down if a body lift has been installed.
NOTE: If the bumper is not a Rugged Ridge product, there could be fitment problems.
PG. 3
Advertising