Rugged Ridge RRC Rear Bumper, 2-Inch Receiver Hitch, 87-06 Jeep Wrangler User Manual
Page 2
Advertising
(Step 5): Locate (2) M12-1.75 x 30mm Hex Head Bolts, (2) M12 Flat Washers, and (2) M12 Lock Washers.
NOTE: M12 Bolts fit most TJ vehicles, 7/16" bolts fit most YJ vehicles - reuse OE bolts
If supplied lower bolts do not fit your application.
Secure the bottom of the bumper to the lower two mounting points using supplied hardware.
Tighten all hardware at this time.
If desired the original lower mounting bolt can be reused.
Advertising