Rugged Ridge Tire Carrier Linkage, 07-14 Jeep Wrangler (JK) User Manual
Page 2
Advertising
Page 2 of 3
4. Remove the Coupler and open the tire carrier. With the
Tire Carrier Bracket in the correct location, mark the two hole
locations for mounting the Tire Carrier Bracket. Remove the
bracket and drill these holes to 5/16”.
5. Use the supplied M10 Self-Tapping bolts to tap threads
into the holes in the horizontal beam.
3. Mark the location of the outer edge of the Tire Carrier
Bracket on the horizontal beam of the tire carrier with tape.
Advertising