Rugged Ridge Cold Air Intake Kit, 2.5L, 91-95 Jeep Wrangler (YJ) - Manual (Page 3)

7. Attach the breather hose to the Rear Intake Tube and to the valve cover using 1-1/16” Hose Clamps. Attach
charcoal box breather hose to Front Intake Tube. Also, reattach radiator support rod to its original location and
use supplied Zip Tie to attach tab of Heat Shield to radiator support rod.
6. Prepare Front Intake Tube for installation by attaching the Air Filter to the end with the slotted bracket using
# 56 Hose Clamp. Attach Front Intake Tube to the Rubber Tube Coupler with the #56 Hose Clamp installed in
step 5. Use M8 Nut to secure bracket of Front Intake Tube to the Rubber Isolator Mount. Adjust Air Filter
attachment for clearance if necessary. Note: This filter is polyester synthetic and never needs to be oiled. It can
be cleaned with warm water and mild detergent dish soap.
8. Congratulations on the purchase and installation of another quality Rugged Ridge product.
© Copyright 2009, Omix-Ada
Omix-Ada Inc.
460 Horizon Dr. Suite 400
Suwanee, Georgia 30024
Page 3 of 3