Rugged Ridge Hood Lock Kit, 07-14 Jeep Wrangler (JK) User Manual
Page 3
Step (7)
Test by closing hood and turning key in a counter clockwise direction with key positioned vertically. Key
should be able to be removed easily. (Fig. 11-12)
If the key cannot be removed, slightly bend tab in small adjustments (Fig. 13) until key is free.
(Fig.11) (Fig.12)
(Fig.13)
Step (8)
Reinstall grille in the reverse as described in Steps 2-4.
Warnings
NEVER drive your vehicle without properly securing all latches. This lock is not a replacement of any factory installed
equipment and must be used in conjunction to avoid any damage to your persons or vehicle. NO lock has a 100%
effective guarantee, use common sense when using and always park in well light areas.
Maintenance.
Frequent lubrication of the lock face and internal components are required. A small amount of bearing grease or
Vaseline should be smeared over the face of the lock to help maintain proper function over time. Monthly checks need
to be made to insure a long operating life.