Rugged Ridge Fender Flare Kit, 09-14 Ford F-150 - Manual (Page 3)

Copyright © 2013 Omix-Ada ® , Inc.
460 HORIZON DR. SUITE 400 | SUWANEE, GA 30024 | PHONE: 770-614-6101 | FAX: 770-614-6069 | [email protected]
All Terrain Flares 09+ Ford F150
6. Hold flare to fender and install factory screw
into factory hole toward rear of wheel well us-
ing 7/32” socket. Continue to hold flare and drill
through bumper cover with a 1/4” drill bit using
forward most hole in flare as a guide.
4. Install Small Screw U-Clip over uppermost factory
hole in fender.
5. Install Front Flare Inner Piece using a supplied
Phillips screw through installed Small Screw U-Clamp.
Use factory screws and 7/32” socket to attach inner
piece to factory holes.
Page 3/5
81630.04