Rugged Ridge Pocket Island Topper, Black, 10-14 Jeep Wrangler Unlimited (JK) - Manual (Page 2)

Part Number: 13592.XX
Jeep® JK Wrangler Roll Bar Island Topper ( 4DR)
Page 2 of 3
(Step 4) - Wrap rear summer top straps over top of rear roll bar cross member and loop through plastic
buckles as shown Pull straps snug. Do Not tighten at this time.
(Step 5) - Place side strap plastic hooks into body tub as shown. Pull straps snug. DO NOT tighten
at this time.
(Step 6) - Loop rear swivel hook straps under seat belt mounting brackets located on rear roll bar. Pull
hooks and straps back over roll bar and secure to elongated holes located on body tub as
shown. Pull straps snug. DO NOT tighten at this time.
(Step 7) (Step 8) (Step 9)
(Step 4) (Step 5) (Step 6)
(Step 8) - Loop Velcro side straps around and under door surrounds.
(Step 7) - Pull straps up between surrounds and side of roll bar. Pull strap around roll bar and secure
back to strap as shown. Front (header strap) should be pulled under front plastic trim.
(Step 9) - Center straps (with buckle) are secured around center post (B-pillar). Pull straps around post
just above plastic trim. Pull strap tight.