Rugged Ridge Sailcloth Bowless XHD Soft Top, Black Diamond, 97-06 Jeep Wrangler User Manual

Page 7

Advertising
background image

Jeep® TJ Wrangler XHD Bowless Summer Top Instructions

Page 7 of 7

(Step 9) - Position rear cross bar onto vehicle making sure it is properly centered. Pull rear buckle
straps back down over roll bar and secure hook to INSIDE of body tub. Pull strap tight
and secure Velcro (pic.9).

(pic.8)

(pic.9)

(pic.10)

(Step 8) - Fold top over back of vehicle making sure rear window remains secured to Velcro strips.
Rear window should be sandwiched between the bowless top and roll bar and sound bar
if equipped (pic.8).

(Step 7) - Straps attached to rear window are to be used on vehicles not equipped with a full rear
sound bar. Secure straps around roll bar and through plastic buckles. Pull straps tight.
DO NOT use straps on vehicles equipped with full roll bar sound bar.

(Step 10) - Rear window should be tight. Repeat steps (6 - 9) if glass in not tight (pic.10).

Washing: Fabric should be washed often using soap, warm water and a soft bristle brush.
Rinse with clear water to remove all traces of soap.

Zippers: Keep Zippers clean and lubricated with a silicone
lubricant. If a zipper opens behind the slider, it can
be repaired by using pliers to squeeze sides back
parallel. Return Zipper back to normal open
position. Squeeze until zipper operates correctly.

Windows: Keep windows clean to avoid scratches. DO NOT
use a brush on windows! Wash with soaked cloth
or sponge and mild dish washing detergent.
NEVER WIPE WINDOWS WHEN DRY.
Be care full when removing snow or ice. Windows
will scratch and crack at low temperatures.

Rev.1 3/14/2012

Part Number: 13751.01
13751.35
13751.37

Advertising