Australian Monitor AV Revolution - Manual (Page 7)

PAGE 5 AV Revolution Quickstart Manual
ADVANCED SETTINGS/ AUDIO SETUP
ADVANCED MODE:
In the bottom right hand corner of the AV Revolution
software there is an “Advanced” button. The features
allow the contractor to adjust DSP processing, min and
max volumes and other advanced features. This section
of the software can be password protected against
inappropriate access. To set a new password click
“Settings > Set Password”.
Out of the box the AV Rev does not have a password
set. A password can be added by simply typing it into
the new password box and a pop up will inform you
that the change was successful. To remove a password
simply type in the “Old password” and then leave the
new password box blank, a prompt should appear
telling you that the password has been removed.
Advanced Mode Set Up:
At the base of the advanced mode screen, there are
four buttons added to the GUI. These allow set up of
functions relating to the Audio Setup, Control Panels,
Master Override and Presets.
AUDIO SETUP
The Audio Setup page allows the user to control all DSP
functions of each input and output signal. The page
also allows the user to see the signal fl ow from input
to output. Within this screen there are small signal
indicators for each input and output. This page makes a
great trouble shooting guide to see signal entering and
leaving the DSP functions.