Australian Monitor AV Revolution - Manual (Page 8)

PAGE 6 AV Revolution Quickstart Manual
AUDIO SETUP CONTINUED
Inputs
Each Mic/Line input can be confi gured as either
Microphone level or Line level. The user has options
such as polarity, analog gain sensitivity and digital trim.
Each Mic/Line input also supports full +48V phantom
power.
The Analog gain steps are gain adjustments in the
Analog domain where as the fader represents control of
the DSP chip.
The stereo inputs follow most of the same functions
that relate to line level inputs on the mic/line input.
Input EQ
Each input has comprehensive EQ functions: high and
low pass fi lters, high and low shelf and two parametric
fi lters. Each EQ can be adjusted in either Q or BW. All
processing is represented on the EQ frequency response
graph on the right hand side of that window.
You can save processing preset fi les for each block from
the EQ onwards. This allows a user to have some preset
EQ fi les such as “Gooseneck Microphone” or “Lapel EQ”.
Dynamics
The dynamics page allows the user to adjust a Noise
gate for each input and also a Compressor or AGC
for each input. Every block that contains two or more
processing options has an overall “bypass” in red and a
per function “bypass” in blue.