Rivera Primo 1056-0002 Pro Clutch (PC-10000-A) - Manual (Page 4)

4
STEP 8:
Dab some high-quality anti-seize on the stud threads
of the Pro-Clutch TM hub! This will prevent the nuts
from sticking and cause the studs to come loose
when the Pro-Clutch TM is disassembled.
Anti- seize!
STEP 7:
The billet aluminum pressure plate is installed
next, flat surfaces facing inward as shown!
Pressure plate
STEP 6A:
Last clutch plate to be installed is a steel drive plate!
Install Steel plate last!
6A
7
8
PC-1000-A PRO-CLUTCH INSTRUCTIONS_PC-1000-A PRO-CLUTCH#2A72D0.qxd 2/15/12 4:03 PM Page 4