Atari 040-0050-01 - Manual (Page 42)

Section 7 – Troubleshooting
gvrSX™ Conversion System Manual
Page 42 of 48
040-0050-01
Rev. A 10/29/2004
Problem Possible Cause Possible Solution
Faulty Fluorescent
Tube Check the fluorescent tube for darkened or cracked
end. Replace the Fluorescent tube if it looks worn.
Marquee Lamp is
Faulty or
Intermittent
Faulty Fluorescent
Fixture
Verify the fluorescent tube pins make a good
connection with the lamp fixture. Check the ballast for
proper operation.
Incorrect Setting in
Operator Menu Check Credits per Game and Credits per Continue
settings from Operator Menu.
Improper Number
of Credits given
when Coins or Bills
are Inserted
Faulty Wiring
Turn off the cabinet. Verify that all the wires are firmly
connected to each coin mech or Bill Validator. Verify
that no wires are frayed or improperly shorting to
ground.
Faulty Coin Mech
Verify the coin mech is not jammed. Make sure the coin
mech is properly aligned and latched to the coin door.
Game will not
accept Coins or
Bills
Faulty Bill Validator
Verify the bill validator is powered on and working. If
the bill validator is faulty, it will usually blink an error
code on the inside of the coin door.