BrandTech Scientific accu-jetpro - Manual (Page 40)

2
4
1
Replacing the battery
1.
To open the battery compartment press at
the textured surface and simultaneously
slide cover back.
Only use original manufacturer's accessories (s. page 45).
The battery must not be replaced by non-rechargeable or re-
chargeable batteries of other manufacturers.
Use of the wrong batteries or improper use of the instrument
(e.g., short-circuit, mechanical damage, overheating, etc.) may
cause the batteries to explode.
Warning!
2.
Remove the battery: grip battery plug
by the wire and pull it gently out of the
socket.
3.
Grip the plug of the new battery by the
wire and push it firmly into the socket until
you can hear it is snapping in.
4.
Insert new battery and close battery
compartment.
40