BrandTech Scientific Titrette - Manual (Page 39)

a
1x
b
c
English
39
1.
Insert batteries
Is everything in the package?
Confirm that your package includes: Titrette
® bottle-top burette, size 25 ml or 50 ml; telescoping filling tube
(length 170 - 330 mm); recirculation tube; 2 micro-batteries 1.5 V (AAA/UM4/LR03); 3 bottle adapters
PP (GL 45/32-33, GL 45/S 40, GL 32-33/NS 29/32); 2 colored light shield inspection windows; perfor-
mance certificate; and this operating manual.
a) Unscrew the air vent cap by hand or
use a coin (Fig. a).
b) Remove the rear housing (Fig. b).
c) Remove the battery case cover and
insert the batteries. Observe the cor-
rect polarity of the batteries (Fig. c).
d) Close the covers of the battery case
tightly. Carefully press the edges so
that the entire cover rests firmly and
without a gap between it and to the
battery case.
e) First connect the housing at the top,
then snap it closed.
f) Screw in the air vent cap.
2.
Switching the
instrument ON
or OFF
Press the On/Off key briefly
to switch the instrument on
or off.
First Steps
Initializing