Graymills MSPR Series Pump OMI - Manual (Page 4)

Graymills Corporation warrants that the equipment manufactured
and delivered, when properly installed and maintained, shall be free
from defects in workmanship and will function as quoted in the pub-
lished specification. Graymills does not warrant process perfor-
mance, nor assume any liability for equipment selection, adaptation,
or installation.
Warranty does not apply to damages or defects caused by shipping,
operator carelessness, mis-use, improper application or installation,
abnormal use, use of add-on parts or equipment which damages or
impairs the proper function of the unit, and modifications made to
the unit. Warranty does not apply to expendable parts needing
replacement periodically due to normal wear and tear.
A new Warranty period shall not be established for repaired or
replaced materials or products. Such items shall remain under
Warranty for only the remainder of the Warranty period of the origi-
nal materials or product.
THE FOREGOING WARRANTIES ARE IN LIEU OF ALL
OTHER WARRANTIES, WHETHER ORAL, WRITTEN,
EXPRESSED, IMPLIED OR STATUTORY. GRAYMILLS COR-
PORATION MAKES NO OTHER WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED. ALL IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE WHICH EXCEED THE AFORESTATED OBLIGA-
TION ARE HEREBY DISCLAIMED BY GRAYMILLS CORPO-
RATION AND EXCLUDED FROM THIS SALE. Graymills war-
ranty obligations and Buyer remedies (except to title) are solely and
exclusively stated herein. In no case will Graymills be liable for
consequential damages. loss of production, or any other loss
incurred due to interruption of service.
Graymills’ obligation under this Warranty shall be limited to:
a) Repairing or replacing (at Graymills sole discretion) any non-
conforming or defective component within one year from the
date of shipment from Graymills.
b) Repairing or replacing (at Graymills sole discretion), compo-
nents supplied by, but not manufactured by Graymills, to the
extent of the warranty given by the original manufacturer.
Buyer must give Graymills prompt notice of any defect or failure.
If you believe that you have a Warranty claim, contact Graymills at
(773)248-6825. Any return material must have an RMA number on
the outside of the package and shipping prepaid or shipment will be
refused. Graymills will promptly examine the material and deter-
mine if it is defective and within the Warranty period.
WARRANTY
MSPR PUMP PARTS LIST AND ASSEMBLY DIAGRAM
Figure 2
7 Bearing Urethane 789-90317
8 Clip ring 301SS 789-08090
9 Bowl 304SS 789-08429
10 Impeller Polycarbonate 789-08088
11 Diffuser Polycarbonate 789-08089
12 Shim 304SS 789-09502
13 Shaft/coupling assembly- MSPR5 304SS 789-90310
MSPR7 304SS 789-90320
MSPR9 304SS 789-90387
MSPR13 304SS 789-90388
14 Spacer Polycarbonate 789-90474
15 Mechanical seal Sil/Carb/Vit 789-08092
16 Motor adapter Cast iron 789-90314
17 Screw, motor adapter to motor Steel 789-09505
18 Pipe plug Steel 724-02124-13
19 O-ring, motor shaft BUNA 789-90318
20 Slinger Polyethylene 744-11817
21 Motor - MSPR5, 1 HP Shaft 300SS 789-08082
MSPR7, 1.5 HP Shaft 300SS 789-08083
MSPR9, 2 HP Shaft 300SS 789-08084
MSPR13, 3 HP Shaft 300SS 789-08819
22 Horizontal Mounting Flange Kit 789-90705
1 Suction head Cast iron 789-90321
2 O-ring, casing (2 required) Viton 789-90319
3 Casing MSPR5 304SS 789-90312
MSPR7 304SS 789-90382
MSPR9 304SS 789-90383
MSPR13 304SS 789-90323
4 Vertical Mounting Flange Kit (optional) C-32106
a Nut Steel
b Clamp Cast iron
c Bolt Steel
Ref Description Material Part Number
Ref Description Material Part Number
Graymills Corporation 3705 N. Lincoln Avenue Chicago, Illinois 60613 773/248-6825 Fax 773/477-8673 www.graymills.com