Graymills Biomatic Distributor - Manual (Page 6)

6
Yes. You need to keep chemicals containing biocides out of the Biomatic
® Parts Cleaner. The same
goes for bleach and Lysol. The microbes are safe against greases, oils, mineral spirits, plant fertilizers,
etc.
How often do I change the filter?
At least once every month. This keeps trapped contaminants from reaching hazardous levels.
What if the filter clogs up with grease?
You can rinse excessive grease from the filter directly into the fluid reservoir. This should prolong the
usefulness of the filter, but the entire filter still needs to be changed every month!
How often do I change the fluid?
Under normal use, you should never have to change the solution. That is one of the biggest advantages
of the Biomatic
® Parts Cleaning System. The microbes clean the solution of hydrocarbon
contaminants, leaving you with a solution that continues to clean. Hazardous hydrocarbon materials are
bioremediated in the Biomatic
® Parts Cleaning System so your “used” solution does not need to be
hauled away as toxic waste. Graymills recommends a once per year cleaning of your biomatic parts
cleaner through draining the fluid from the sink and reservoir and transferring it into a container
temporarily, then cleaning any sludge, metallic chips or debris from the sink and reservoir. The fluid can
then be returned to the parts cleaner and it can be placed into service again.
How often do I add fluid to the Biomatic
® Parts Cleaning System?
In most circumstances it will be necessary to add one 5 gallon container of pre-blended Super Biotene
®
every 4-6 weeks to replace drag-out and evaporation.
Can I use Super Biotene
® in other parts Cleaners?
Yes. Although Super Biotene ® is especially formulated to work in our Biomatic parts cleaners it is a very
effective aqueous cleaning solution that is safe to use in other aqueous parts washers as a general
purpose solution.
Can I use other solutions in the Biomatic
® Parts Cleaner?
No. The Biomatic ® Parts Cleaning System has been painstakingly developed to work effectively as a
whole – machine, parts to be cleaned, fluid, and microbes. Other solutions may damage the machine or
kill the microbes, thereby eliminating the advantages of the Biomatic
® System. The use of other
solutions in the Biomatic ® Parts Cleaners will void the warranty.
Why are the Biomatic
® Parts Cleaners heated?
Two reasons. First, it keeps the microbial activity at an optimal level to clean the solution as quickly as
possible. Secondly, warm solution simply cleans better than cold solution (think about washing dishes in
cold water versus warm). As an added benefit, the warm solution makes it more enjoyable to work with,
especially in the winter!
From a purely business perspective, what are the benefits of Biomatic
® Parts Cleaning System?
The Biomatic
® Parts Cleaning System is the ideal purchase for companies interested in controlling
operating costs and minimizing their waste streams. Simply stated, companies that use it can expect to
derive the following money-saving benefits :
◊ Safe, aqueous-based solution maintains effectiveness through repeated uses - and does
not have to be replaced.
◊ Since no hazardous by-products are created, expensive disposal contracts and regulatory
reporting are not required. Remember, the companies are required to dispose of the filters
in a responsible manner, in accordance with state and local regulations.
◊ Monthly service costs are held to a minimum.