Graymills Liftkleen TSeries Lk Rotobasket - Manual (Page 2)

6. Four ¼”-20- screws are provided to secure the Roto-Basket assembly to the lift
platform of the Liftkleen. U-Bolts may also be used. It may be easier to remove
the basket from the mounting frame before installing the frame on the lift
platform. The mounting frame should be positioned towards the front of the lift
platform, with the ratchet mechanism on the right as you face the unit. Install the
four ¼”-20 screws and flat washers into the mounting frame and so they extend
through the screen of the lift platform and secure with hex nuts provided.
7. The chain and bracket should extend in a straight line from handle of the ratchet
mechanism to the flange of the Liftkleen. The chain should not extend at an angle.
Mount the bracket to front flange of the Liftkleen. A second bracket size is
provided to accommodate different width of flanges of the Liftkleen. Chain length
should be about 15 ¾” long but can be adjusted to fit.
8. The basket is removed/replaced by turning the basket with the chain until it
engages.
9. Always remove and replace basket from the mechanism with the basket closed to
prevent product from shifting and spilling out of the basket. An optional “docking
station” can be purchased from Graymills to use on a work table to hold the
basket for loading/unloading.
MAINTENANCE
10. Periodic inspection of ratchet mechanism, basket, chain and bracket is
recommended
11. The Torsion Spring, Extension Spring, Chain Hook and Chain, and Retaining
Ring are parts that could be replaced after extended normal usage. Consult
Graymills if your usage requires some other replacement parts.
G r a y m i l l s C O R P O R A T I O N w w w . g r a y m i l l s . c o m
3 7 0 5 N . L i n c o l n • C h i c a g o , I L 6 0 6 1 3 ( 7 7 3 ) 2 4 8 - 6 8 2 5 F a x : ( 7 7 3 ) 4 7 7 - 8 6 7 3